Type “Y-1” series spring mounts with two inch deflection solve critical vibration problems. These mounts are preferred over the one inch deflection mounts and most rubber mounts due to their higher static deflection. These mounts are normally recommended to building structures where negligible vibration transmission to the building is required. “Y-1” type spring mounts with two inch deflection are designed for noise and vibration control applications in critical areas on concrete or wooden floors.
FEATURES:
Deflection: 1″
Load Range: 43 – 2200 lbs
Three piece cast iron housing for the spring.
Provided with slotted mounting holes and a non-skid elastomeric acoustic pad on the base for bolting to the floor.
Resilient elastomeric snubbers on the inner panel prevent metal to metal contact and allow the spring to function properly.
Built in leveling device (external or internal).
Can be supplied with flat top or non skid neoprene top surfaces in case of internal level adjustment.
NOTES:
Spring: Hot Dip Galvanized
Adjust mounting so that the upper housing clears the lower housing by at least 1/4″ but not more than 1/2″
Spring Mounts – Y-1-200 Series
Type “Y-1” series spring mounts with two inch deflection solve critical vibration problems. These mounts are preferred over the one inch deflection mounts and most rubber mounts due to their higher static deflection. These mounts are normally recommended to building structures where negligible vibration transmission to the building is required. “Y-1” type spring mounts with two inch deflection are designed for noise and vibration control applications in critical areas on concrete or wooden floors.
FEATURES:
NOTES:
APPLICATIONS
Download PDF
Enquiry about Spring Mounts - Y-1-200 Series
Your Name
Email
Phone
What would you like to know
Description
(External Adjustment)
(Internal Adjustment – Pin Top)
(Internal Adjustment – Flat Top)
(Internal Adjustment – Neoprene Top)
x = (Model Types E, P, F or N see above)