Type “X-100” series Spring Mounts with one inch deflection solves troublesome vibration problems. These mounts are preferred over most rubber mounts due to the high static deflection of the spring. “X-100” series spring mounts are designed for noise and vibration control applications in critical areas on concrete or wooden floors.
FEATURES:
Deflection: 1″
Load Range: 30 – 700 lbs
Two piece cast iron housing for the spring.
Provided with slotted mounting holes with a non-skid elastomeric acoustic pad on the base for easy bolting to the floor.
Resilient elastomeric snubbers on the inner panels prevent metal to metal contact and allow the spring to function properly.
Built in leveling device (external or internal).
Can be supplied with flat or non-skid neoprene top surfaces in case of internal level adjustment.
NOTES:
Spring: Hot Dip Galvanized
Base Plate has non-skid Acoustical Neoprene Pad
Adjust the mounting so that the upper housing clears the lower housing by at least 1/4″ but not more than 1/2″
Spring Mounts – X-100 Series
Type “X-100” series Spring Mounts with one inch deflection solves troublesome vibration problems. These mounts are preferred over most rubber mounts due to the high static deflection of the spring. “X-100” series spring mounts are designed for noise and vibration control applications in critical areas on concrete or wooden floors.
FEATURES:
NOTES:
APPLICATIONS
Download PDF
Enquiry about Spring Mounts - X-100 Series
Your Name
Email
Phone
What would you like to know
Description
(EXTERNAL ADJUSTMENT)
(INTERNAL ADJUSTMENT – PIN TOP)
(INTERNAL ADJUSTMENT – FLAT TOP)
(INTERNAL ADJUSTMENT – NEOPRENE TOP)
* x = (Model Types E, P, F or N)